path := $libdir/macro,.

# ==== setting output and test-flag ====
output      := gChqsc_nc5_28ms
test_ft     := n         # test-ft for phasing with XEASY
reduce_flag := n         # reduce size for test-ft by factor of 2
np          := 512 
ni          := 123 

# ==== reading of data ====
read vnmr  fid {$np}c {$ni}c byteswap    # byteswap is needed on Linux
# write integer tmp
# readkay integer tmp {$np}c {$ni}c        # gradsort for SE = 'y'

dim 1                   # phase correction due to gradsort
phase -90
dim 2
phase 0

# ==== setting of parameters ====
#DIMENSION: 1 (1H)
si(1)      = 2048 
aqm(1)    := RSHc
w0(1)      = 499.8058174 
delta(1)   = 0.000143212 
ppmmax(1)  = 11.756 

#DIMENSION: 2 (15C)
si(2)      = 512 
aqm(2)    := RSHc
w0(2)      = 125.6759379
delta(2)   = 0.000227338
ppmmax(2)  = 37.562

set n_dim= 2

window1 := "window sin 90"
window2 := "window sin 90"

ph0_d(1) = -184.1-89.5
ph1_d(1) = 0.0
ph0_d(2) = 0
ph1_d(2) = 0

# ==== processing ====

dim 1
#suppress cos 64      # optional solvent suppression

# ==== ft ====
strip_ft 1 1..$si(1)     # extract left half for aromatic only
dim 2
mul 0.5 1
strip_ft 2 1..$si(2)

if ('$test_ft'!='y') then
   dim 1
   cflatt iterative polynom 5
   dim 2
   cflatt iterative polynom 5
end if

dim 1 2

scale noise

if ('$test_ft'=='y') then
   write easy16 $output.rr r r byteswap
   write easy16 $output.ri r i byteswap
   write easy16 $output.ir i r byteswap
else
   write easy16 $output byteswap
   system echo 'Identifier for dimension w1 ... C13' >> $output.3D.param
   system echo 'Identifier for dimension w2 ... H1'  >> $output.3D.param
end if